Showing all 7 results

  • 20 Channel Wireless Receiver Unit

    The 20ch Wireless Transceiver unit is one of the most versatile, user-friendly systems on the market today. It works seamlessly with the QuickFire Master I or II Master Controllers and is also manufactured to the same standards. It is enclosed in a Seahorse SE300 case for durability in the field – ensuring the device internals are kept water and dust-resistant. Use of a membrane keypad allows easy control without exposure to the elements. It monitors temperature and humidity in case of extreme weather conditions that could affect the system and alerts the master controller. As well as receiving control from the master controller, it can be fired with the “input trigger” switch on the receiver control panel.

    For multiple firing positions, connect wired 24-Shot rails for more firing options. All 20 on-board cues can be fired simultaneously if required with a 32V at 4A firing out. Show files can be downloaded directly to the receiver. One cue can also be used to trigger another 20-Channel or 32-Channel controller to start their own show files. Alternatively, the input and output triggers facilitate daisy-chaining and triggering of multiple units. Safety: While the system is off, all cues are shunted to ground. A key-switch prevents unwanted firings and allows for a test mode. The test mode permits communications with the master controller to report continuity status. An internal ‘charge pump’ ensures power isn’t available to the firing circuits until the system is armed via the keyswitch.

    Read more
  • 32 Channel Wireless Receiver Unit

    The 32ch Wireless Transceiver unit is one of the most versatile, user friendly systems on the market today. It is designed to work perfectly with the QuickFire Master Controller II and is also manufactured to the same standards. It’s enclosed in a Seahorse SE520 case for durability in the field – ensuring the device internals are kept water and dust-resistant. Use of a membrane keypad allows easy control without exposure to the elements. It monitors temperature and humidity in case of extreme weather conditions that could affect the system and alerts the master controller.

    The 32-Channel wireless receiver is controlled from a master controller or ‘input trigger,’ or, Trigger switch’ button for spectacular manual displays. Furthermore the external effects are controlled with a selectable output voltage of 12, 24 or 48 Volts at 7A. For multiple firing positions, connect wired 32-Shot rails for more firing options. These can also be manually triggered one shot at a time if required.

    All 32 on-board cues can fire simultaneously! Show files can be downloaded directly to the receiver. The trigger switch or input trigger can start the show, or, can step through one shot at a time – standalone operation if required. One cue can also be used to trigger another 20-Channel or 32-Channel controller to start their own show files. Alternatively, the featured input and output triggers allow daisy-chaining of multiple units.

    Read more
  • 36 Pin All In One Tester

    With the 36 Pin all in one tester from QUICK FIRE you can now efficiently test cables, E-matches and output for a reliable system each and every show.

    • Test your e-matches
    • Test your cable
    • Firing out put
    • Dimensions (LWH) 14.7 x 8.8 x 2.6 cm (5.8″ x 3.5 x 1″)

     

    Read more
  • 4ch AB Selector

    This 4ch AB selector is a must have for company’s that like to run 2 master controllers at the same time.
    Enclosed in a water proof SE300 case and the stainless steal 2 wire connectors and water proof switchers this item is well built and making it easy for you to switch from primary to back up master controller.

    Read more
  • Quickfire Master Controller II

    The Quickfire Master Controller II is a user-friendly hybrid system that can be fired manually, semi-automatically or in full automatic mode.
    It’s simple to use, and perfect to fire low-budget displays right through to the largest pyro-musical spectaculars.

    The system consists of:

    • A Master Unit
    • Software

    Four software packages are included with the Master controller –

    • QuickFire Choreography
    • Shotmaker
    • TimeCode.
    • Show Controller
    Read more
  • Single Channel Wireless Receiver Unit

    The 1ch  Wireless transceiver unit is an inexpensive way to remotely fire a shot or relay a wireless signal.

    Safety: When the system is off the cue is shunted to ground. A keyswitch prevents unwanted firings. The test mode determines continuity of the shot, and permits communication between the control unit and receiver. An internal ‘charge pump’ ensures power isn’t available to the firing circuit until the system is armed. A safety discharge capacitor is fitted which shorts the charge pump to ground when not firing.

    Read more
  • Universal 32 Cue Through Rails

    • Compatible with QuickFire’s 32 channel
    • Works with any 36 pin centronics system
    • Fire One, Fire Lynx, Pyro Magic, Ace Pyro,
    • Pyromaster and others
    • It is enclosed in a seahorse SE520 Case for durability in the field ensuring the device internals are kept water and dust resistant.
    • Dimensions (LWH) 38 x 31 x 18cm (14.85″ x 12.15″ x 6.85″)
    Read more